SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 332)

Command Line Interface
4-24
4
Example
This example shows how to display the remaining time until a configured delayed
reset of the switch will take place:
end
This command returns to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line Configuration, and VLAN
Database Configuration.
Example
This example shows how to return to the Privileged Exec mode from the Interface
Configuration mode:
exit
This command returns to the previous configuration mode or exit the configuration
program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global
Configuration mode, and then quit the CLI session:
Console#show reload
The switch will be rebooted at Nov 23 22:52:14 2007.
Remaining Time : 0 days, 4 hours, 31 minutes, 46 seconds.
Console#
Console(config-if)#end
Console#
Console(config)#exit
Console#exit
Press ENTER to start session
User Access Verification
Username: