SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 503)

Address Table Commands
4-195
4
show power mainpower
Use this command to display the current power status for the switch.
Command Mode
Privileged Exec
Example
Address Table Commands
These commands are used to configure the address table for filtering specified
addresses, displaying current entries, clearing the table, or setting the aging time.
Console#show power mainpower
Unit 1 Mainpower Status
Maximum Available Power : 180 watts
System Operation Status : on
Mainpower Consumption : 15 watts
Software Version : Version 0x1B64, Build 0x07
Console#
Table 4-58 show power mainpower parameters
Parameter Description
Maximum Available Power The available power budget for the switch (see power mainpower maximum
allocation on page -190)
System Operation Status The current operating power status (displays on or off)
Mainpower Consumption
The current power consumption on the switch in watts
Software Version The version of software running on the PoE controller subsystem in the switch.
This software can be updated using the copy file controller command (see
page 4-82).
Table 4-59 Address Table Commands
Command Function Mode Page
mac-address-table static Maps a static address to a port in a VLAN GC 4-196
clear mac-address-table
dynamic
Removes any learned entries from the forwarding database PE 4-197
show mac-address-table Displays entries in the bridge-forwarding database PE 4-197
mac-address-table
aging-time
Sets the aging time of the address table GC 4-198
show mac-address-table
aging-time
Shows the aging time for the address table PE 4-198