SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 335)

System Management Commands
4-27
4
Example
Banner
These commands are used to configure and manage administrative information
about the switch, its exact data center location, details of the electrical and network
circuits that supply the switch, as well as network administrator and manager contact
information. This information is only available via the CLI and is automatically
displayed before login as soon as a console or telnet connection has been
established.
Console(config)#hostname RD#1
Console(config)#
Table 4-9 Banner Commands
Command Function Mode Page
banner configure Configures the banner information that is displayed before login GC 4-28
banner configure
company
Configures the Company information that is displayed by banner GC 4-29
banner configure
dc-power-info
Configures the DC Power information that is displayed by
banner
GC 4-30
banner configure
department
Configures the Department information that is displayed by
banner
GC 4-31
banner configure
equipment-info
Configures the Equipment information that is displayed by
banner
GC 4-31
banner configure
equipment-location
Configures the Equipment Location information that is displayed
by banner
GC 4-32
banner configure
ip-lan
Configures the IP and LAN information that is displayed by
banner
GC 4-33
banner configure
lp-number
Configures the LP Number information that is displayed by
banner
GC 4-33
banner configure
manager-info
Configures the Manager contact information that is displayed by
banner
GC 4-34
banner configure
mux
Configures the MUX information that is displayed by banner GC 4-35
banner configure
note
Configures miscellaneous information that is displayed by
banner under the Notes heading
GC 4-35
show banner Displays all banner information NE, PE 4-36