SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 41)

System Defaults
1-7
1
Port Configuration Admin Status Enabled
Auto-negotiation Enabled
Flow Control Disabled
Rate Limiting Input limits Disabled
Port Trunking Static Trunks None
LACP (all ports) Disabled
Broadcast Storm
Protection
Status Enabled (all ports)
Broadcast Limit Rate 64 kbits per second
Spanning Tree
Algorithm
Status Enabled, RSTP
(Defaults: All values based on IEEE 802.1w)
Fast Forwarding (Edge Port) Disabled
Address Table Aging Time 300 seconds
Virtual LANs Default VLAN 1
PVID 1
Acceptable Frame Type All
Ingress Filtering Enabled
Switchport Mode (Egress Mode) Hybrid: tagged/untagged frames
GVRP (global) Disabled
GVRP (port interface) Disabled
Traffic Prioritization Ingress Port Priority 0
Weighted Round Robin Queue: 0 1 2 3
Weight: 1 2 4 8
IP DSCP Priority Disabled
IP Settings IP Address DHCP assigned, otherwise 192.168.1.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
DHCP Client: Enabled
BOOTP Disabled
Multicast Filtering IGMP Snooping Snooping: Enabled
Querier: Enabled
Multicast VLAN Registration Disabled
Table 1-2 System Defaults (Continued)
Function Parameter Default