SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 468)

Command Line Interface
4-160
4
Default Setting
• Default groups: public 20 (read only), private 21 (read/write)
• readview - Every object belonging to the Internet OID space (1.3.6.1).
• writeview - Nothing is defined.
• notifyview - Nothing is defined.
Command Mode
Global Configuration
Command Usage
• A group sets the access policy for the assigned users.
• When authentication is selected, the MD5 or SHA algorithm is used as
specified in the snmp-server user command.
• When privacy is selected, the DES 56-bit algorithm is used for data encryption.
• Note that the authentication, link-up and link-down messages are legacy traps
and must therefore be enabled in conjunction with the snmp-server enable
traps command (page 4-155).
Example
20. No view is defined.
21. Maps to the defaultview.
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#