SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 338)

Command Line Interface
4-30
4
Command Usage
The user-entered data cannot contain spaces. The banner configure
company command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested for
situations where whitespace is necessary for clarity.
Example
banner configure dc-power-info
This command allows the administrator to configure the DC power information
displayed in the banner. Use the no form to remove the DC power information from
the banner display.
Syntax
banner configure dc-power-info floor floor-id row row-id rack rack-id
electrical-circuit ec-id
no banner configure dc-power-info [floor | row | rack | electrical-circuit]
• floor-id - The floor number.
• row-id - The row number.
• rack-id - The rack number.
• ec-id - The electrical circuit ID.
Maximum length of each parameter: 32 characters
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure
dc-power-info command interprets spaces as data input boundaries. The use
of underscores ( _ ) or other unobtrusive non-letter characters is suggested for
situations where whitespace is necessary for clarity.
Example
Console(config)#banner configure company Acme_Corporation
Console(config)#
Console(config)#banner configure floor 3 row 15 rack 24
electrical-circuit 48v-id_3.15.24.2
Console(config)#