SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 101)

Simple Network Management Protocol
3-49
3
Web – Click SNMP, SNMPv3, Groups. Click New to configure a new group. In the
New Group page, define a name, assign a security model and level, and then select
read and write views. Click Add to save the new group and return to the Groups list.
To delete a group, check the box next to the group name, then click Delete.
Figure 3-30 Configuring SNMPv3 Groups
pethMainPower
UsageOnNotification
1.3.6.1.4.1.202.20.65.173.2.1.0.45 This notification indicates PSE Threshold
usage indication is on; the power usage is
above the threshold.
pethMainPower
UsageOffNotification
1.3.6.1.4.1.202.20.65.173.2.1.0.46 This notification indicates that the PSE
Threshold usage indication is off; the usage
power is below the threshold.
a. These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps
on the SNMP Configuration menu.
Table 3-5 Supported Notification Messages (Continued)
Object Label Object ID Description