SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 341)

System Management Commands
4-33
4
banner configure ip-lan
This command allows the administrator to configure the device IP address and
subnet mask information displayed in the banner. Use the no form to remove the IP
and subnet information from the banner display.
Syntax
banner configure ip-lan ip-mask
no banner configure ip-lan
ip-mask - The IP address and subnet mask of the device.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure ip-lan
command interprets spaces as data input boundaries. The use of underscores
( _ ) or other unobtrusive non-letter characters is suggested for situations
where whitespace is necessary for clarity.
Example
banner configure lp-number
This command allows the administrator to configure the LP number information
displayed in the banner. Use the no form to remove the LP number information from
the banner display.
Syntax
banner configure lp-number lp-num
no banner configure lp-number
lp-num - The LP number. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Console(config)#banner configure ip-lan 192.168.1.1/255.255.255.0
Console(config)#