Siemens Automation System S7-400 - Manual (Page 124)

Networking
5-26
Automation System S7-400 Hardware and Installation
A5E00850741-01
Order Numbers
You can order the fiber-optic cables under the order numbers specified in
Table 5-4.
Table 5-5 Order Numbers - Fiber-Optic Cables
Fiber-Optic Cables Form Order Number
SIMATIC NET PROFIBUS plastic fiber-optic,
duplex conductor
I-VY2P 980/1000 150A
Plastic fiber-optic cable with 2 conductors and a PVC sheath,
without connectors,
for use in environments with low mechanical stress (e.g. in a
cabinet or for test assemblies in the laboratory)
50 m ring 6XV1821-2AN50
SIMATIC NET PROFIBUS plastic fiber-optic, standard cable
I-VY4Y2P 980/1000 160A
Robust round cable with 2 plastic fiber-optic cable conductors,
PVC outer sheath and PA inner sheath, without connectors,
for use indoors
per meter
50 m ring
100 m ring
6XV1821-0AH10
6XV1821-0AN50
6XV1821-0AT10
SIMATIC NET PROFIBUS PCF fiber-optic, standard cable
I-VY2K 200/230 10A17 + 8B20
PCF fiber-optic cable with 2 conductors, PVC outer sheath, fitted
with 4 Simplex connectors, whip length 30 cm each, for distances
up to 300 m
(Other lengths on request)
50 m
75 m
100 m
150 m
200 m
250 m
300 m
6XV1821-1CN50
6XV1821-1CN75
6XV1821-1CT10
6XV1821-1CT15
6XV1821-1CT20
6XV1821-1CT25
6XV1821-1CT30
5.8.2 Simplex Connectors and Connector Adapter
Definition
Simplex connectors allow you to connect the fiber-optic cable to the integrated
fiber-optic cable interface on the PROFIBUS device. In some modules (e.g.
IM 153-2 FO, IM 467 FO) two Simplex connectors (one for the sender and one for
the receiver) are inserted in the module by means of a special connector adapter.
Prerequisite
The PROFIBUS device must be equipped with a fiber-optic cable interface, such as
the ET 200M (IM153-2 FO) or the IM 467 FO for S7-400.