Intel IXF1104 - Manual (Page 132)

Intel
®
IXF1104 4-Port Gigabit Ethernet Media Access Controller
Datasheet 132
Document Number: 278757
Revision Number: 009
Revision Date: 27-Oct-2005
7.0 Electrical Specifications
Table 39 through Table 58 “LED Interface AC Timing Parameters” on page 154 and Figure 35
“SPI3 Receive Interface Timing” on page 137 through Figure 52 “LED AC Interface Timing” on
page 154 represent the target specifications of the following IXF1104 MAC interfaces:
— SPI3
— JTAG
— MDIO
— Pause Control
— CPU
— LED
— System
— GMII and RGMII
— SerDes
— Optical Module
These specifications are not guaranteed and are subject to change without notice. Minimum and
maximum values listed in
Table 41 “DC Specifications” on page 134 through Table 58 “LED
Interface AC Timing Parameters” on page 154 apply over the recommended operating conditions
specified in Table 40 .
Table 39. Absolute Maximum Ratings
Parameter Symbol Min Max Units Comments
Supply voltage
VDD -0.3 2.2 volts Core digital power
VDD2, VDD3 -0.3 4.25 volts I/O digital power
VDD4, VDD5 -0.3 4.25 volts I/O digital power
AVDD1P8_1/2 -0.3 2.2 volts Analog power
AVDD2P5_1/2 -0.3 4.25 volts Analog power
Operating
temperature
Ambient TOPA -40 +85 °C Copper mode
Ambient TOPA 0.0 +70 °C Fiber mode
Storage temperature TST -40 +150 °C –
Caution: Exceeding these values may cause permanent damage to the device. Functional
operation under these conditions is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.