IBM 1725 SLS - Manual (Page 93)

Printer Engine
Features
2-59 Printer Configuration
Horizontal Offset
Vertical Offset
Setting Default Paper
Default Paper is used when the default media is requested but the
default input bin is missing from the engine so there’s no way to
sense the media size automatically.
Setting Inputbin x Name
These options are used to name input bins 1 and 2.
Menu Administration/Engine/Image Alignment/Horiz Offset
Choices 00000-00300 (0.00"/0 mm-1.00"/25.4 mm)
Default 00100 (0.33"/.84 mm)
Notes Values above 100 move the image to the right.
Values below 100 move the image to the left.
Menu Administration/Engine/Image Alignment/Vertical Offset
Choices 00000-00300 (0.00"-1.00")
Default 00100 (0.33"/.84 mm)
Notes Values above 100 move the image down.
Values below 100 move the image up.
Vertical Duplex Offset default = 00150
Menu Administration/Engine/Default Paper
Choices Letter, A4
Default Letter
Menu Administration/Engine/Inputbin x Name
Choices Up to 16 alphanumeric characters
Default Inputbin 1 “upper” / Inputbin 2 “lower”