IBM 1725 SLS User Manual

Page 230

Updating

System

Software

QMS 1725 SLS Print System User's Guide

8-46

The

must be used to signify binary data. The copy command

takes approximately 5 minutes to transfer the file. When the

transfer is complete, the PC prompt returns.

Note: The

INSTALL TO DISK CONNECTING

..... message remains in

the message window until the transfer is completed.

9 The software is installed when the following messages

appear:

INSTALL TO DISK

DSK6:

and then

INSTALL TO DISK

COMPLETED

10 Once you have completed installing the system software you

are ready to boot the system. Return to your printer and

press the Menu key. The message window displays the fol-

lowing message:

QMS SOFTLOAD

X.X

INSTALL TO DISK

11 Press the Next key until the message window displays the

following message:

QMS SOFTLOAD

X.X

BOOT SYSTEM

12 Press the Select key to enter the Boot System submenu. The

following message appears in the message window:

BOOT SYSTEM

HARD DISK

13 Press the Select key and the following message appears in

the message window:

BOOT SYSTEM

HARD DISK 6

14 Hard disk 6 is the internal hard disk. If you have any external

hard disk connected you can cycle through them by press-