IBM 1725 SLS - Manual (Page 92)

Printer Engine
Features
QMS 1725 SLS Print System User's Guide 2-58
Printer Memory
MB Printer Mem, listed as System Use on the status page, is the
number of megabytes of RAM available to be split among the various
memory clients. The size of this client's memory limits the number of
jobs that may be queued simultaneously. When this client's memory
is exhausted, the printer slows down, and the hosts are forced to wait.
Printer Engine Features
Through the Administration/Engine menu you can set print engine-
related parameters.
Adjusting the Image Alignment
This option allows you to adjust the horizontal and vertical placement
of printed images.
To check image alignment, print a standard status page (Administra-
tion/Special Pages/Print Status). When the printer is placing images
properly, the alignment angle bar in the lower-left corner of the status
page is 0.5"/12.7 mm from the left and bottom edges of the page. If
the angle bar is off, use the Administration/Engine/Image Alignment
option to align the image horizontally and vertically in pixel incre-
ments (1/300" or 0.08 mm). There are separate adjustments for the
front and back of a sheet for duplex alignment.
» Note: Engine constraints may limit the accuracy of pixel alignment.
Menu Administration/Memory/MB Printer Mem
Status Page
Alias System Use
Choices None--For information only.
Default Depends on the amount of memory installed.
Notes This memory client is not user-configurable.