IBM 1725 SLS - Manual (Page 240)

Electrical
Requirements
QMS 1725 SLS Print System User's Guide B-4
Electrical Requirements
Environmental Requirements
Physical Characteristics
Frequency 50/60 Hz (
±
2 Hz)
Power
Requirements 100/110/120v 50/60 Hz (about 90-130 VAC) or
220/240v 50 Hz (about 200-260 VAC)
Noise Level Idle; less than 50 dB (A)
Printing; less than 60 dB (A)
Ozone Density The printer emits less than 0.1 ppm maximum with a
100% duty cycle under 8 hours of continuous operation
Relative
Humidity Printing: 20-80% RH (non-condensing)
Storage: 35-85% RH (non-condensing)
Temperature
Range Printing: 50-90° F (10-32.5° C)
Storage: 32-95° F (0-35° C)
Atmospheric
Pressure 570-760 mm Hg
Dimensions WxDxH
17.8" x 22.4" x 19.0"
454 mm x 570 mm x 483 mm
Weight Approximately 97 lbs (44 kg) without cassettes and 106
lbs (48 kg) with cassettes installed