IBM 1725 SLS - Manual (Page 207)

Removing and
Re-installing
the Tray
Assembly
8-23 Printer Options
8 From the front of the printer, pull the tray assembly straight
out until it reaches the safety catches.
9 Momentarily lift the tray to gently pull it over the safety
catches.
O Caution: Do Not continue lifting the tray assembly as you slide it out
of the printer. After the tray assembly has been lifted over the safety
catches, allow the tray to return to a level, horizontal position. Then pull
the tray assembly straight out.
Take the tray assembly completely out of the printer.
You are now ready to install an optional feature in the printer. Follow
the instructions for the feature you are installing, then return to the
next section, “Re-installing the Tray Assembly” to complete the proce-
dure.