IBM 1725 SLS - Manual (Page 38)

Configuration
Menu
QMS 1725 SLS Print System User's Guide 2-4
Configuration Menu
The printer’s configuration menu allows you change the default
printer configuration settings. Any changes made to the configuration
will reside as new default settings and affect all subsequent print jobs.
The options in the configuration menu are organized under three
main menus:
n
Operator Control Menu
Use this menu to select document processing options such as
copy count, choosing input and output paper bins, chaining input
bins, and duplexing (if a duplexing unit is installed). Document
processing selections are usually specified within individual jobs
since each job has its own requirements. However, if there’s no
way of specifying these selections within an application, use the
control panel to change selections, send the job, and then
change the defaults back.
» Note: Defining document processing selections for a particular job
through the control panel is not recommended in a shared environment.
When many systems are using the same printer, there’s no way of
making sure that no other jobs are sent to the printer while the
defaults are changed.
n
Administration Menu
Use this menu to maintain printer-host communication informa-
tion, and for selecting and configuring printer emulations, config-
uring special pages, printing engine calibration, and configuring
hard disks.
» Note: For information on printer-host communication using an optional
interface, refer to the QMS CrownNet Interface System
Administrator’s Guide (available through QMS).
n
Installation Menu
Use this menu to establish passwords for the Operator Control
and Administration menus. This menu displays only when an
optional security card is installed. See chapter 8, “Printer
Options,” for details on using a security card.