IBM 1725 SLS - Manual (Page 210)

Memory
Modules
(SIMMs)
QMS 1725 SLS Print System User's Guide 8-26
Memory Modules (SIMMs)
Additional printer memory on small boards called single in-line mem-
ory modules, or SIMMs, allows you to download more fonts, increase
the printer's buffers (where it stores data sent from the computer),
and duplex print at a higher resolution.
Your printer comes standard with 13 MB RAM and can be upgraded
through the installation of additional SIMMs to a maximum of 32 MB.
» Note: When installing a memory upgrade, make sure the memory added is
distributed among memory clients. See the Memory submenu section in
chapter 2, “Printer Configuration,” for more information on memory
distribution.
Installing a SIMM
If you are replacing a 4 MB SIMM with an 8 or 16 MB SIMM, you
should first read the “Removing a SIMM” section of this chapter.
» Note: The following instructions are written for the system administrator.
Do not attempt this procedure if you have no experience working with circuit
boards.