IBM 1725 SLS - Manual (Page 150)

Status
Messages
QMS 1725 SLS Print System User's Guide 6-4
Service Messages
When the printer requires service, operation stops and the message
window displays
CALL FOR SERVICE followed by the location of the
problem and error number. Have this information available when you
call for service.
» Note: A service message sometimes occurs as a result of an unusual
combination of events, not because of an actual problem. When the printer
stops and a service message displays in the message window, turn the
printer off and back on. This often clears the service message indicator and
printer operation resumes. Always try this before making a service call.
Service calls should be placed to the vendor from whom you pur-
chased the printer. If you cannot get service from your vendor, see
appendix A, “QMS Customer Support.”
WAITING ON
INPUT
END JOB?
The compiler is waiting on incoming
data for the first job in the queue. The
job may not have an end-of-job
indicator and therefore cannot end. The
message clears if more input arrives
from the port or if you press the Cancel
key. No other jobs can be printed until
this job has ended.
WARMING UP The printer is warming up.