IBM 1725 SLS - Manual (Page 64)

Emulations
QMS 1725 SLS Print System User's Guide 2-30
Setting HP PCL 5 Parameters
For details on the HP PCL 5 language, refer to the HP PCL 5 Printer
Language Technical Reference Manual ( available from Hewlett-
Packard Co.; order part number 5961-0509)
HP PCL5C Technical
Support Notes, available free through the QMS Bulletin Board, Q-
FAX, and CompuServe, also has information on HP PCL5C. (See
appendix A, “QMS Customer Support,” to find out how to access the
bulletin board, Q-FAX, and CompuServe.) In addition, appendix C of
this guide has information on the PCL 5 Document Option Com-
mands.
Default Font
Sets the default font for this emulation.
Choices Level 2—For PostScript Level 2 files and most Level 1 files.
Level 1 B/W—For files that contain only black-and-white
PostScript Level 1 operators. This mode does not support the
PostScript color operators; the use of color operators could
cause the print job to fail.
Level 1 Color—For files that contain color PostScript Level 1
operators. This mode accepts color PostScript Level 1
operators and translates these commands to the appropriate
grayscale. This is the recommended setting for Level 1
compatibility since it contains all of the commands in Level 1 B/
W and the color commands.
Default Level 2
Menu Administration/Emulations/PCL 5/Default Font
Choices Courier12, Courier12Bold, Courier12Italic, Courier10,
Courier10Bold, Courier10Italic, Lineprinter, Times*,
Times*Italic, Times*Bold, Times*BldItalic, Univ*, Univ*Italic,
Univ*Bold, Univ*BldItalic, UnivCond*, UnivCond*Italic,
UnivCond*Bold, UnivCond*BldItlc, Select by Index
Default Courier12