IBM 1725 SLS - Manual (Page 40)

Configuration
Menu
QMS 1725 SLS Print System User's Guide 2-6
take the printer off line (the Online/Offline indicator is not lighted), and
finally press the Menu key.
Example
The following table shows how to use control panel keys to access
the printer configuration menu. Press the control panel keys in the
order shown. The printer responds by displaying a status message or
configuration menu in the message window.
» Note: You may need to press the Next key more than one time to advance
through the list of options.
The printer must be off line and idle before you can access the config-
uration menu.
Selecting Configuration Menu Options
Once you access the configuration menu, you use the control panel
keys to move through the menu. Use the following keys:
Example
To change the default printer emulation from ESP to PostScript, press
the control panel keys in the order shown in the following table.
Press this
key to... The message
window reads...
Online/
Offline Turn off the Online/Offline indicator and
ready the printer for configuration. IDLE
Menu Access the configuration menu. CONFIGURATION
OPERATOR CONTROL
Press this key to...
Next Advance to the next option or submenu within a menu.
Previous Return to the previous option or submenu within a menu.
Select Select an option or enter a submenu.