IBM 1725 SLS - Manual (Page 135)

Using the
Image
Calibration
Page
4-9 Print Quality
» Note: You may want to use the PostScript settransfer operator for
different gamma corrections not predefined in the printer.
3 Check your grayscale quality by printing a calibration page.
Use the Calibration Page option in the Administration/Spe-
cial Pages submenu to print a status page.
4 Repeat steps 1 through 3 until you see the steps in the gray-
scale bar chart on the calibration page.
» Note: You may need to recalibrate each time you change the toner
cartridge.
L