FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 57)

2. Define the following settings:
WWNN
Specify the WWNN value provided by the "I/O virtualization Option".
The admin server generates WWPNs automatically from the values that are input into the WWNN and the number of HBA
ports.
HBA ports
Specify the following values according to the system configuration.
- To create a single-path configuration, specify "1".
For details, refer to " Figure 7.3 Procedures for Single-path Configurations ".
- To create a multi-path configuration, specify "2".
However, it is necessary to specify "1" during installation of the operating system. Specify "2" and reconfigure HBA address
rename settings after setting up the multi-path driver.
For details, refer to "
Figure 7.4 Procedures for Multi-path Configurations ".
Figure 7.3 Procedures for Single-path Configurations
- 42 -