FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 225)

SPARC Enterprise M4000/M5000/M8000/M9000 Server Management Data
- Section Name
Enter [SPARCEnterprisePartitionModelServer] as the section name.
- Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
chassis_name
Enter the chassis name (the "chassis_name" in the [SPARCEnterprisePartitionModelChassis] section).
partition_no
The number of a partition. Enter a number between 0 and 23.
server_name
Enter the resource name that will be used to identify the server.
Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters and hyphens
("-").
Note
Server names should be unique between all servers.
Names are not case-sensitive.
ip_address
Enter the same IP address as that set within the server's operating system.
Enter a string of numeric values (between 0 and 255) and periods.
Note
IP addresses should be unique between all resources.
SPARC M10-4S Server Management Data
- Section Name
Enter [SPARCM10PartitionModelServer] as the section name.
- Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
chassis_name
Enter the chassis name (the value of "chassis_name" in the [SPARCM10PartitionModelServer] section).
partition_no
The number of a partition. Enter a number between 0 and 23.
server_name
Enter the resource name that will be used to identify the server.
Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters and hyphens
("-").
- 210 -