FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 192)

Network Properties Area
Physical Connections
The list of physical connections between the server's network interfaces and LAN switch ports is displayed.
When a column heading in the list is clicked, the color of the selected column will change and the resources can be sorted in either
ascending or descending order.
Hardware Maintenance Area
NIC Summary
The MAC addresses and IP addresses of each server are displayed.
For servers other than PRIMERGY BX servers and PRIMEQUEST servers, only admin LAN information is displayed.
For SPARC Servers/SPARC Enterprise, only the IP address is displayed.
Information
The IP address displayed is the one set within the server's operating system.
For network interfaces that were made redundant using BACS software, the information set in BACS (within the operating system) is
displayed.
Partition Configuration
The following information is displayed only when a PRIMEQUEST, or a SPARC Enterprise M4000/M5000/M8000/M9000 server,
or a server in a SPARC M10-4S is selected.
Partition name
The name used to identify a partition is displayed.
SB
The ID of the system board used to configure a partition is displayed.
IOB
The ID of the IO board used to configure a partition is displayed.
GSPB (Giga-LAN SAS and PCI_Box Interface Board)
The ID of the GSPB used to configure a partition is displayed.
Reserved SB
The ID of the Reserved SB assigned to a partition is displayed.
LSB
The partition logical system board (LSB) number is displayed.
Only displayed for SPARC Enterprise M4000/M5000/M8000/M9000 or SPARC M10-4S.
XSB
The partition eXtended System Board (XSB) number is displayed.
Only displayed for SPARC Enterprise M4000/M5000/M8000/M9000 servers.
PSB
The partition physical system board (PSB) number is displayed.
Only displayed for SPARC M10-4S.
- 177 -