FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual

Page 178

* Note: This option is only available for chassis equipped with power monitoring capabilities.

Table A.4 Popup Menus Available for Servers

Popup Menu

Function

Submenu

Server (*1)

Registers a server.

Agent

Delete

Deletes a server.

Update

Updates a server.

Modify

Registration Settings

Modifies a server's registration settings.

HBA address rename settings (*2)

Modifies the HBA address rename settings of a server.

Network Settings (*3, *4)

Modifies the network settings of a server.

Spare Server Settings (*2)

Modifies a server's recovery settings.

Maintenance Mode

Set

Places a server into maintenance mode.

Release

Sets a server to active mode.

Power

Powers on a server.

OFF

Powers off a server after shutting down its operating
system.

OFF (Forced)

Powers off a server without shutting down its operating
system.

Reboot

Reboots a server after shutting down its operating
system.

Reboot (Forced)

Reboots a server without shutting down its operating
system.

LED (*3)

Turns the maintenance LED on.

OFF

Turns the maintenance LED off.

Hardware
Maintenance

Re-configure

Detects and reconfigures the properties of a replaced
server.

Backup/Restore

Restore

Restores a system image to a server.

Cloning

Deploy

Deploys a cloning image to a server.

Console Screen (*5)

Opens the server console.

External Management
Software (*6)

Opens external server management software.

Export (*7)

Environmental Data

Exports environmental data collected from servers.

*1: Available only for PRIMERGY BX series and PRIMEQUEST servers.
*2: Available only for VM hosts when using PRIMEQUEST.
*3: Available only for PRIMERGY BX servers.
*4: Available only for VM guests.
*5: When opening the L-Server console screen at the second time or later, a window for iRMC management may be opened instead of
the console screen. If an iRMC management screen is displayed, close that screen and then start the console screen again.
*6: Available only for PRIMERGY series, PRIMEQUEST, SPARC Enterprise M series, and SPARC M10 servers.
*7: This option is only available for chassis equipped with power monitoring capabilities.

- 163 -