FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 154)

[Windows]
Installation_folder \Agent\etc\FJSVrcx.conf
Installation_folder \Agent\etc\ipaddr.conf
[Linux]
/etc/FJSVrcx.conf
/etc/opt/FJSVnrmp/lan/ipaddr.conf
Sample configuration of the definition file (FJSVrcx.conf)
admin_LAN=192.168.1.11
hostname=node-A
- admin_LAN
Enter the IP address used by the reference server on the admin LAN.
- hostname
Enter the physical server name of the reference server.
Format of the definition file (ipaddr.conf)
The definition file is made up of the following entries:
- One or more node entries
- One or more interface entries (with or without redundancy) under each node entry
Figure 17.3 Sample configuration of the definition file (ipaddr.conf)
Refer to the following sample file for details of how to set the definition file (ipaddr.conf).
[Windows]
Installation_folder \Agent\etc\ipaddr.sample
[Linux]
/etc/opt/FJSVnrmp/lan/ipaddr.sample
Note
Blank spaces and comment lines (lines starting with a comment symbol (#) are ignored.
The expected content of each entry is explained below.
- Node Entries
The following table explains how to define each node entry.
- 139 -