FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 52)

- Admin LAN
- IP address
- MAC address (NIC1)
- SAN Boot/Admin LAN Redundancy
- MAC address (NIC2)
Automatic registration of agents is not performed after server registration. After registering servers, register agents as required.
If registering agents, register agents after checking the product name is displayed in the General Area of [Resource Details] tab.
Executing [Update] acquires the latest information.
With Agent Registration
- Physical server name
- Remote management controller
- IP address
- User ID
- Password
- Association with server management software (ServerView)
- Enable/Disable
- SNMP Community
- Admin LAN
- IP address
- Admin LAN Redundancy
- MAC address (NIC2)
- OS
- Type
Agents are automatically registered after server registration is completed.
Physical Server Name
Enter a name to assign to this physical server.
Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters and hyphens
("-").
Remote management controller
IP address
Enter the IP address of this server's remote management controller.
User ID
Enter the ID of a remote management controller user account with administrative authority over this server.
Enter up to 16 characters, including alphanumeric characters and symbols (ASCII characters 0x20 to 0x7e).
Password
Enter the password of the above remote management controller user account.
Enter up to 16 characters, including alphanumeric characters and symbols (ASCII characters 0x20 to 0x7e).
This field can be omitted if no password has been set for this user account.
- 37 -