FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 108)

- When saving a file in CSV format from the system configuration template, or exporting a system configuration file from the ROR
console
Export will be performed using the latest file format given in " B.2 File Format ".
The following operations, usually performed from the ROR console, can be equally performed using the pre-configuration function.
- Registration
- " 7.1 Registering VIOM Coordination "
- " 7.3 When Using Blade Servers "
- " 7.4.2 Registering LAN Switches "
- " 7.2 Registering VM Management Software "
- " 7.7 Registering Power Monitoring Devices " (*1)
- " 7.8 Registering Admin LAN Subnets "
- " 7.3.4 Configuring VLANs on LAN Switches "
- " 7.4.3 HBA address rename Settings " (*2)
- "Chapter 8 Configuring Monitoring Information" in the "Setup Guide VE"
- " Chapter 18 Server Switchover Settings "
- Modification
- " 8.1 Changing Admin IP Addresses " (*3)
- " 9.1.11 Changing Admin LAN Subnets "
- " 9.1.2 Changing Server Names "
- " 9.1.3 Changing Admin IP Addresses " (*3)
- " 9.1.4 Changing SNMP Communities "
- " 9.1.5 Changing Server Management Unit Configuration Settings "
- " 9.1.7 Changing VM Host Login Account Information "
- " 9.1.8 Changing the VLAN Settings of LAN Switch Blades "
- " 9.1.9 Changing HBA address rename Settings " (*2)
- " 9.1.10 Changing Boot Options "
- " 9.3 Changing VIOM Registration Settings "
- " 9.4 Changing LAN Switch Settings "
- " 9.5 Changing VM Management Software Settings "
- " 9.6 Changing Power Monitoring Environment Settings "
- " 9.7 Changing Monitoring Information Settings "
- " 18.3 Changing Server Switchover Settings "
*1: To start collecting environment data, the collection settings should be manually set from the ROR console's option dialog.
*2: Restart all the managed servers that were either registered or modified following an import operation.
*3: The pre-configuration's scope of configuration is the same as that of the ROR console.
Moreover, the pre-configuration function can perform the same labels and comments settings as those available in BladeViewer. Those
settings are described in "
Chapter 6 BladeViewer " and " 6.5.1 Listing and Editing of Labels and Comments ".
- 93 -