FUJITSU FR family 32-bit microcontroller instruction manuel CM71-00101-5E User Manual

Page 264

240

CHAPTER 7 DETAILED EXECUTION INSTRUCTIONS

7.123

STILM (Set Immediate Data to Interrupt Level Mask
Register)

Transfers the immediate data to the interrupt level mask register (ILM) in the program
status (PS).
Only the lower 5 bits (bit4 to bit0) of the immediate data are valid.
At the time this instruction is executed, if the value of the interrupt level mask register
(ILM) is in the range 16 to 31, only new "ILM" settings between 16 and 31 can be
entered. If the value "u8" is in the range 0 to 15, the value 16 will be added to that data
before being transferred to the "ILM". If the original "ILM" value is in the range 0 to 15,
then any value between 0 and 31 can be transferred to the "ILM".

■

STILM (Set Immediate Data to Interrupt Level Mask Register)

Assembler format:

STILM #u8

Operation:

→

ILM

Flag change:

N, Z, V, and C: Unchanged

Execution cycles:

1 cycle

Instruction format:

Example:

STILM #14H

–

MSB

LSB

ILM

1 1 1 1 1

1 0 1 0 0

Before execution

After execution

Instruction bit pattern : 1000 0111 0001 0100