FUJITSU FR family 32-bit microcontroller instruction manuel CM71-00101-5E User Manual

Page 121

Text mode
Original mode

CHAPTER 7 DETAILED EXECUTION INSTRUCTIONS

7.21

ORB (Or Byte Data of Source Register to Data in Memory)

Takes the logical OR of the byte data at memory address "Ri" and the byte data in "Rj",
stores the results to the memory address corresponding to "Ri".
The CPU will not accept hold requests between the memory read operation and the
memory write operation of this request.

■

ORB (Or Byte Data of Source Register to Data in Memory)

Assembler format:

ORB Rj, @Ri

Operation:

(Ri) or Rj

→

(Ri)

Flag change:

Set when the MSB (bit 7) of the operation result is "1", cleared when the MSB is "0".

Set when the operation result is "0", cleared otherwise.

V and C: Unchanged

Execution cycles:

1 + 2a cycles

Instruction format:

–

MSB

LSB