FUJITSU SPARC T5120 - Manual (Page 168)

142 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Installing the DVD/USB Module (Illustrates installing in a SPARC Enterprise
T5120 server)
2. Slide the pull tab back into the system.
3. Install the hard drive you removed during the DVD/USB module removal
procedure.
4. Plug in the power cords.
See “Connect Power Cords to the Server” on page 178 .
5. Power on the system.
See “Power On the Server Using the poweron Command” on page 179 or “Power
On the Server Using the Front Panel Power Button” on page 180 .
Related Information
■ “Remove the DVD/USB Module” on page 139
■ “Servicing the Hard Drive Backplane” on page 152