FUJITSU SPARC T5120 - Manual (Page 135)

Servicing Motherboard Components 109
FIGURE: Installing a PCIe Card (SPARC Enterprise T5220)
6. Insert the PCIe/XAUI card into the correct slot on the riser board.
7. Replace the PCIe/XAUI riser.
See “Install a PCIe/XAUI Riser” on page 104 .
8. Install the top cover.
See “Install the Top Cover” on page 175 .
9. Slide the server into the rack.
See “Return the Server to the Normal Rack Position” on page 177 .
10. Connect any data cables required to the PCIe/XAUI card.
Route data cables through the cable management arm.