Power supply configuration reference – FUJITSU SPARC T5120 User Manual
Page 162
136
SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
7. At the ALOM CMT sc> prompt, type the showenvironment command to
verify the status of the power supplies.
Power Supply Configuration Reference
The following table shows the positions of the power supplies in a SPARC Enterprise
T5120 server as viewed from the server rear panel.
The following table shows the positions of the power supplies in a SPARC Enterprise
T5220 server as viewed from the server rear panel.
Note –
Both tables represent the power supplies with the FRU names displayed by
the ILOM show command.
TABLE:
Power Supply Locations and FRU Names for SPARC Enterprise T5120 Servers
FRU Names
/SYS/PS0
/SYS/PS1
TABLE:
Power Supply Locations and FRU Names for SPARC Enterprise T5220 Servers
FRU Names
/SYS/PS1
/SYS/PS0