FUJITSU SPARC T5120 - Manual (Page 166)

140 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
2. Unplug the power cords.
See “Disconnect Power Cords From the Server” on page 62 .
3. Attach an antistatic wrist strap.
4. Remove the hard drive that is adjacent to the DVD/USB module.
The number of this HDD will vary, depending on the backplane type:
■ 4-disk capable backplane: remove HDD3
See “Four-Drive Capable Backplane Configuration Reference” on page 77 .
■ 8-disk capable backplane: remove HDD7
See “Eight-Drive Capable Backplane Configuration Reference” on page 78 .
■ 16-disk capable backplane: remove HDD13
See “Sixteen-Drive Capable Backplane Configuration Reference” on page 79 .
5. Release the DVD/USB module from the hard drive backplane.
Use the finger indentation in the hard drive bay below the DVD/USB module to
extend the release tab.