Related information, Install the fan power board – FUJITSU SPARC T5120 User Manual
Page 171
Servicing Boards and Components
145
Related Information
■
“Install the Fan Power Board” on page 145
▼ Install the Fan Power Board
1. Lower the board into its mushroom standoffs in the chassis floor and slide the
board to the right into the paddle card.
FIGURE:
Installing a Fan Power Board (Illustrates installation in a SPARC Enterprise
T5120 server)
2. Secure the board to the chassis with a Phillips screw.
3. Install the fan modules.
See
“Install a Fan Module” on page 127
.
4. Install the top cover.
See
“Install the Top Cover” on page 175
.
5. If the server has been removed from the rack, return it to the rack as described
in
“Reinstall the Server in the Rack” on page 176
.
6. Slide the server into the rack.
See
“Return the Server to the Normal Rack Position” on page 177
7. Connect the power cords.
See
“Connect Power Cords to the Server” on page 178
.
8. Power on the system.
See
“Power On the Server Using the poweron Command” on page 179
or
On the Server Using the Front Panel Power Button” on page 180
.