FUJITSU SPARC T5120 - Manual (Page 146)

120 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Removing the Motherboard Assembly (SPARC Enterprise T5120 Server Shown)
16. Place the motherboard assembly on an antistatic mat.
Related Information
■ “Install the Motherboard Assembly” on page 120
▼ Install the Motherboard Assembly
Caution – This procedure requires that you handle components that are sensitive to
static discharge. Static discharges can cause the components to fail.
1. Tilt the motherboard assembly to position it into the chassis.
When you install the motherboard, ensure that you position the board as far
forward in the chassis as possible.
2. Position the motherboard so that its screw holes align with the chassis
standoffs.