FUJITSU SPARC T5120 User Manual

Page 137

background image

Servicing Motherboard Components

111

PCIe and XAUI Card Reference for SPARC
Enterprise T5220 Servers

The following table shows the physical PCIe/XAUI slot locations on the SPARC
Enterprise T5220 server, as viewed from the rear of the system.

Use the following table to plan your PCIe/XAUI card configuration on SPARC
Enterprise T5220 server.

Note –

The lower numbered PCIe/XAUI slots (Slots 0 - 2) should be occupied first.

PCIe or XAUI names in ILOM messages are displayed with the full FRU name, such
as /SYS/MB/RISER0/PCIE0.

* Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

† Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

TABLE:

FB-DIMM Configuration Installation Map (SPARC Enterprise T5220 Servers)

PCIe 3

PCIe 4

PCIe 5

PCIe 0/XAUI 0

PCIe 1/XAUI 1

PCIe 2

TABLE:

PCIe and XAUI Support (SPARC Enterprise T5220 Servers)

Slot

PCIe Controller

Supported Device Types

FRU Name

PCIe 0 or
XAUI 0

*

* Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

1

x8 PCIe operating at x4
XAUI expansion card

/SYS/MB/RISER0/PCIE0

/SYS/MB/RISER0/XAUI0

PCIe 1 or
XAUI 1

† Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

1

x8 PCIe operating at x4
XAUI expansion card

/SYS/MB/RISER1/PCIE1

/SYS/MB/RISER1/XAUI1

PCIe 2

0

x16 PCIe operating at x8

/SYS/MB/RISER2/PCIE2

PCIe 3

1

x8 PCIe operating at x4

/SYS/MB/RISER0/PCIE3

PCIe 4

1

x8 PCIe operating at x4

/SYS/MB/RISER1/PCIE4

PCIe 5

1

x8 PCIe operating at x8

/SYS/MB/RISER2/PCIE5

This manual is related to the following products: