ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 5)

Table of Contents v
Wiring the ExPAC/XBUS/XIO to the Monitor .... 5-29
Final Instructions .................................................. 5-36
Chapter 6 Configuration and Activation .. 6-1
Hardware and Software Compatibility .................... 6-2
Starting Qstart ......................................................... 6-2
Setting Up the Qstart Parameters ............................ 6-3
Configuring the Monitor Location ................................. 6-7
Create and Configure the Monitor Location ........... 6-7
Configure the Monitoring Point(s) ........................ 6-10
Assigning and Editing Devices ............................. 6-12
Activating the Monitor ................................................. 6-72
Setting Up the RTU to Retrieve the Current Data
through Modbus ............................................. 6-74
Designating the Data for Retrieval ........................ 6-74
Verifying the Modbus Output Data ....................... 6-74
Running Sensor Diagnostics ........................................ 6-76
Performing Confirmations............................................ 6-79
Collecting Data from the Monitor ................................ 6-82
Upgrading the Monitor Firmware ................................ 6-85
Viewing Diagnostic and Data Logs.............................. 6-87
Chapter 7 Monitor Installation .................. 7-1
Mounting the Monitor on Manhole Rung ...................... 7-3
Mounting the Monitor to the Manhole Wall .................. 7-4
Mounting the Monitor to the Manhole Rim ................... 7-7
Chapter 8 Analog and Digital Inputs and
Outputs…….. .................... 8-1
Analog Inputs ................................................................. 8-3
Connecting a Third-Party Instrument to an
Analog Input on the XIO ................................. 8-3
Analog Outputs .............................................................. 8-8
Connecting a Third-Party Device to an Analog
Output on the XIO ........................................... 8-8
Digital Inputs ................................................................ 8-13
Connecting a Third-Party Device to a Digital
Input on the XIO ............................................ 8-13