ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 409)

In-2 ADS TRITON+ Manual
sensor
extension, 3-41
securing in the pipe/manhole,
3-64
securing to the band, 3-51
securing to the ring, 3-27
standard A-to-B USB cable, 4-17
USB serial interface, 4-16
driver installation, 4-17
specifications, A-10
CDMA/EV-DO communication
modem
information, 1-13
cellular network, 2-4
certifications, 1-10
ATEX, 1-13
CSA, 1-21
Declaration of Conformity, 1-24
EC Type Examination Certificate,
1-17
IECEx, 1-19
modem, 1-13
SIRA, 1-17
special conditions for use, 1-6
channel, 2-7, 6-16, 6-29, 6-47
checking the sensors, 10-18
cleaning the sensors, 10-18
coefficient A, 6-34
coefficient B, 6-34
collecting data, 6-82
COMM + EXT PWR port, 2-8
communication, 1-5, 4-1
antenna, 1-5
direct, 2-2
ExPAC LED codes, 10-31
installing the antenna, 4-5, 4-14
installing the wireless antenna, 4-7
internal modem, 1-5
antenna installation, 4-7
SIM card installation, 4-11
landline, 2-2
modem
testing monitor cryouts, 10-8
monitor
viewing diagnostic codes, 10-5
monitor activity codes, 10-5, C-1
monitor ANTENNA port, 2-8
monitor COMM + EXT PWR
port, 2-8
obtaining the IP address from the
monitor, 10-5
on-site, 2-5, 4-16, 4-17
overview, 2-4
internal modem, 2-5
remote, 2-2
troubleshooting, 10-38
verifying signal strength, 10-5
wireless, 2-2, 2-4, 4-3
compliance, 1-10
ATEX, 1-13
CSA, 1-21
Declaration of Conformity, 1-24
hazardous area, 1-13, 1-19, 1-21
IECEx, 1-19
configuration
editing devices
Data Delivery, 6-53
Flow, 6-55
Modem Setup, 6-49
Peak Combo Sensor, 6-16
Smart (Ultrasonic) Depth
Sensor, 6-44
Surface Combo Sensor, 6-29
Ultrasonic (Smart) Depth
Sensor, 6-44
Modbus, 9-1, 9-10, D-2
overview, 1-26
Telog Ru-33, D-2
configure a location, how to, 6-7
confined space entry, 3-3
confirmations, 6-79, 10-4
confirming sensors, how to, 6-79
connecting a laptop directly to
monitor, 4-16
connecting a laptop to monitor
through the ExPAC, 4-17
connecting the monitor to a Telog
Ru-33, D-3