Removing the media (xćaxis) motor – HP 750 User Manual
Page 77
Reassembling: Push the gear onto the
shaft as far as it will go. Align the holes
on the gear with the holes on the shaft.
1 Remove the electronicsĆenclosure
cover ' page 6Ć5.
2 Remove the window ' page 6Ć13.
3 Remove the center cover ' page 6Ć14.
4 Remove the right endcover ' page 6Ć17.
5 Disconnect the carriageĆmotor cable from
the main PCA (connector labelled X).
6 Remove the spittoon ' page 6Ć44.
7 Remove the two screws that attach the
driveĆroller gear to the driveĆroller shaft.
8 Remove the driveĆroller gear from the
driveĆroller shaft.
X-Carriage
motor
The gear may be stiff to remove.
Tx 10
6-25
Removal and Replacement
C4705-90000
Removing the Media (XĆAxis) Motor