HP 750 - Manual (Page 65)

1 Open the window. 2 Loosen the top screw of the right and
left front trim (two full turns).
3 Carefully push the right endcover and
the window apart, far enough to lift the
window up so that the right pivot just
clears its socket.
Do not lever the window up more
than is necessary, so as not to strain
or break the left pivot.
4 Move the window to the right so that the
left pivot slides out of its socket. Lift the
window clear of the plotter.
Do not let the windowĆpivot springs
drop out of the endcovers.
Tx 15
6-13 Removal and Replacement C4705-90000
Removing the Window