HP 750 - Manual (Page 60)

1 Read ESD Precautions ' page 6Ć3.
2 Unscrew the SIMM cover at the back of
the plotter and remove it.
3 Take the memory module out of itsbag,
holding the module only by the edges.
4 Hold the memory module by itsedges
with the nonĆmetallic edge toward you
and the notch facing down.
5 Tilt the nonĆmetallic edge rightwards
(arrow) and firmly push the module into the
slot. Pull the nonĆmetallic edge towards the
left until the module clicksinto place.
6-8 Removal and Replacement C4705-90000
Reinstalling a Memory Module (DRAM/ROM SIMM)
: