HP 750 - Manual (Page 137)

Troubleshooting C4705-90000 8-19
24 YĆAxis Friction ' page 8Ć45
The purpose of this test is to check if the dynamic friction on the YĆaxis is in the correct
range.
25 YĆStatic Friction ' page 8Ć46
The purpose of this test is to check the static friction of the carriage assembly at different
postions along the YĆaxis.
26 YĆAxis Encoder ' page 8Ć47
The purpose of this test is to check the YĆaxis encoder and its servo loop.
27 Cutter ' page 8Ć48
The purpose of this test is to verify the operation of the cutter.
28 Bail Stepper ' page 8Ć49
The purpose of this test is to verify the operation of the bail stepper motor.
29 Media Sensor ' page 8Ć50
The purpose of this test is to verify the operation of the media sensor with or without
media.
30 Window Sensor ' page 8Ć51
The purpose of this test is to verify the operation of the window sensor.
31 Pinchwheel Sensor ' page 8Ć52
The purpose of this test is to verify the operation of the pinchwheel sensor.
32 Button Test ' page 8Ć53
The purpose of this test is to verify the operation of the frontĆpanel buttons.