beautypg.com

HP 750 User Manual

Page 15

background image

700

750C

Plus

750C

755

CM

1-3

Product Information

C4705-90000

Interface

The plotter has both RSĆ232ĆC and Centronics/BiĆTronics interfaces.

Network Connections

The following network operating systems are supported through an optional MIOexternal

network interface:

D Novell Netware (Ethernet)
D LAN Manager
D Token Ring network
D Apple LocalTalk
D HP external controller
D TCP/ICP host work station
D Ethertalk

Memory

DesignJet 700 plotters have 5.5 MB of standard onĆboard RAM. A PostScript SIMM and an

MIOcard are optional. There are also two RAM expansion sockets, which can hold an optional

4MB, 8 MB, 16 MB or 32 MB single inĆline memory module (SIMM). The maximum RAM is

therefore 69.5 MB.

DesignJet 750C Plus plotters have 8 MB of standard onĆboard RAM, plus an additional 3 MB

used internally. A PostScript SIMM and an MIOcard are optional. There are also two RAM

expansion sockets, which can hold an optional 4 MB, 8 MB, 16 MB or 32 MB single inĆline

memory module (SIMM). The maximum RAM is therefore 72 + 3 MB.

DesignJet 750C plotters have 4 MB of standard onĆboard RAM, plus an additional 3 MB used

internally. A PostScript SIMM and an MIOcard are optional. There are also two RAM expansion

sockets, which can hold an optional 4MB, 8 MB, 16 MB or 32 MB single inĆline memory module

(SIMM). The maximum RAM is therefore 68 + 3 MB.

DesignJet 755CM printers (Model C3198A) have 4 MB of standard onĆboard RAM, plus an

additional 3 MB used internally. In addition, the Postscript SIMM, the MIOcard and two 32 MB

SIMMs are preĆinstalled in the standard configuration. Therefore the total amount of useable

RAM is 68 MB.
DesignJet 755CM printers (Model C3198B) have 8 MB of standard onĆboard RAM, plus an

additional 3 MB used internally. In addition, the Postscript SIMM, the MIOcard and two 32 MB

SIMMs are preĆinstalled in the standard configuration. Therefore the total amount of useable

RAM is 72 MB.

Accuracy

The accuracy of the plotters in drawing a vector is"0.38 mm (0.015 in) or "0.2% of the

specified vector length, whichever is greater, at 23 _C (73 _F) at 50Ć60% relative humidity, on

HP special polyester film.