HP 750 - Manual (Page 183)

750C
755
CM
Print Quality C4705-90000 9-5
Print Modes
The plotters/printers have a large number of print modes. A print mode specifies how to
interpret and put on media a set of bitmap planes, each of which consists of a sequence of
rows. Each mode corresponds to a unique combination of the following parameters:
D Print resolution (300 dpi, 600 dpi).
D Number of passes per swath.
D Number of advances per swath.
D Number of swaths per advance.
D Print direction (unidirectional or bidirectional).
D Swath height (swath width).
D Carriage speed.
D Smart Area Fill (SAF ).
D Print masks.
D Servicing states.
D Multiple dotting (K).
User input to print mode selection consists of the following:
D Choice of media type.
D Choice of printĆquality setting (fast, normal, best).
D The language in which the file is received.
D The model of plotter/printer used.
PrintĆMode Characteristics
Information on some of the print mode parameters is given in the following print mode
parameter tables:
Color plots on Opaque Bond
This table is only applicable to DesignJets 750C and 755CM (C3198A).
PRINT
QUALITY
PRINT
DIRECTIONS
CARRIAGE
SPEED
RESOLUTION NO. OF PASSES SWATH
WIDTH SWATHS/
ADVANCE
Unidir/Bidir IPS N IN N
Fast Unidir 18.33 300 1 0.32 1
Normal Bidir 18.33 300 2 0.32 1
Best Bidir 18.33 300 4 0.32 2