Figure 1 figure 2, Figure 3 – HP 750 User Manual
Page 221
C4705-90000
10-23
Product History and Service Notes
3 Identify the cuts in the YĆyoke where the fan deflector is to be installed. These cuts are on
the left side of the plotter.
4 Passing the fan deflector between the slider rods and the encoder strip, install the two
front clips in the cut as shown in figures 1 and 2.
Figure 1
Figure 2
Take care not to cut yourself on the encoder strip inside the plotter.
5 Install the third clip as shown in figure 3.
Figure 3