HP 750 User Manual
Page 153
Troubleshooting
C4705-90000
8-35
15. Area fill PQ Plot
The purpose of this test is to check the performance between the ink and the media using
area fills and to validate the media settings.
Perform the area fill PQ plot test as follows:
Load media before performing this test.
1 In the Service Tests submenu, scroll to 15 Area Fill PQ Plot" and press Enter.
SERVICE TESTS
15 Area fill PQ plot
2 The Printing PRESS ENTER when finished" message is displayed on the frontĆpanel
while the plotter produces the area fill PQ plot.
3 Press the Enter buttonwhenthe test has beencompleted.
4 For more informationontroubleshooting the area fill PQ plot ' page 9Ć17.