Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 528)

528
Specifications
AF points: Max. 61 points (Cross-type AF point: Max. 41 points)
* Number of available AF points, Dual cross-type AF
points, and cross-type AF points vary depending on the
lens used.
* Dual cross-type focusing at f/2.8 with 5 AF points
vertically aligned at the center.
(AF group: When group A lenses are used)
Focusing brightness
range: EV -3 - 18 (Conditions: f/2.8-sensitive center AF point,
One-Shot AF, room temperature, ISO 100)
Focus operation: One-Shot AF, AI Servo AF, Manual focusing (MF)
AF area selection mode:Single-point Spot AF (manual selection), Single-point AF
(manual selection), AF point expansion (manual
selection: up, down, left, and right), AF point expansion
(manual selection: surround), Zone AF (manual selection
of zone), Large zone AF (manual selection of zone),
Automatic selection AF
AF point automatic
selection conditions: Based on EOS iTR AF setting
(Enables AF incorporating human face/color information)
* iTR: Intelligent Tracking and Recognition
AF Configuration Tool: Case 1 - 6
AI Servo AF
characteristics:
Tracking sensitivity, Acceleration/deceleration tracking,
AF point auto switching
AF function
customization: 17 functions
AF fine adjustment: AF Microadjustment (All lenses by the same amount,
Adjust by lens)
AF-assist beam: Emitted by the EOS-dedicated external Speedlite
• Exposure Control
Metering mode: Approx. 360,000-pixel RGB+IR metering sensor and
216-zone TTL open-aperture metering
EOS iSA (Intelligent Subject Analysis) system
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 6.2% of viewfinder at center)
• Spot metering (approx. 1.5% of viewfinder at center)
* Spot metering and Multi-spot metering linkable to AF
point
• Center-weighted average metering
Metering brightness
range: EV 0 - 20 (at room temperature, ISO 100, with evaluative
metering)