Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 253)

253
P Multiple Exposures
You can select a 1 image recorded on the card as the first single
exposure. The image data of the selected 1 image will remain intact.
You can only select 1 images. You cannot select 41 / 61 or
JPEG images.
1
Select [Select image for multi.
expo.].
X The images on the card will be
displayed.
2
Select the first image.
Turn the < 5 > dial to select the
image to be used as the first single
exposure, then press <
0 >.
Select [ OK ].
X The file number of the selected image
will be displayed at the bottom of the
screen.
3
Take the picture.
When you select the first image, the number of remaining
exposures as set with [
No. of exposures ] will decrease by 1. For
example, if [ No. of exposures ] is 3, you can shoot two
exposures.
Merging Multiple Exposures with an Image Recorded on the Card
Images shot with [ z 2: Highlight tone priority ] set to [ Enable ] and
images applied with cropping information (p.441) cannot be selected as
the first single exposure.
[ Disable ] will be applied for [ z 1: Lens aberration correction ] and
[ z 2: Auto Lighting Optimizer ] regardless of the settings of the 1
image selected as the first single exposure.
The ISO speed, Picture Style, high ISO speed noise reduction, color
space, etc. set for the first
1 image will also be applied for the
subsequent images.
If the Picture Style is set to [ Auto ] for the RAW image selected as the
first 1 image, [ Standard ] will be applied for shooting.
You cannot select an image taken with another camera.