Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 517)

517
Troubleshooting Guide
[ 5 1: File name ] is set to [ *** + image size ]. Select the camera’s
unique file name (preset code) or the file name registered under User
setting 1 (p.203).
If the card already contains recorded images, the image file number
may not start from 0001 (p.206).
Make sure the correct date and time are set (p.55).
Check the time zone and daylight saving time (p.56, 57).
The shooting date and time do not appear in the image. The date and
time are recorded in the image data as shooting information. When
printing, you can imprint the date and time in the picture, using the date
and time recorded in the shooting information (p.415).
If the number of images recorded on the card exceeds the number the
camera can display, [
### ] will be displayed.
If the LCD monitor is dirty, use a soft cloth to clean it.
The LCD monitor display may seem slightly slow in low temperatures,
or look black in high temperatures. It will return to normal at room
temperature.
The fourth character in the file name changes.
The file numbering does not start from 0001.
The shooting date and time displayed is incorrect.
The date and time are not in the image.
[###] is displayed.
The LCD monitor does not display a clear image.